How to Install Board and Batten Vinyl Siding

If you want to install board and batten vinyl siding to your house and you want to inform yourselves on that matter, you are in the right place!

 

What is Vinyl Siding?

 

Vinyl siding is an exterior siding type that is made of polyvinyl chloride (PVC) which is a form of plastic. Usually, it is used to cover the exterior of houses rather than big buildings. Vinyl siding is used for both decorative and weatherproofing reasons. It is a durable and inexpensive siding option for your house, while it has also cons coming with it such as lowering your house’s value or causing some moisture problems, keep that in mind! Another thing is that removing vinyl siding is significantly easy and because that it is manufactured chemically there are lots of options for it such as wolverine vinyl siding, liquid vinyl siding, mitten vinyl siding, and gentek vinyl siding. The list goes on and on.

 Vinyl siding is quite common in cold and rainy environments such as UK, Canada, New Zealand, and Austria because it is an inexpensive siding method that provides good weatherproofing, and it simply looks good.

 

Installing Board and Batten Vinyl Siding

Here’s how to install your board and batten vinyl siding by yourself, step by step.

  1. Furring Strip Installation
    Horizontal furring strips will be applied every 12 inches. If not, a nailable sheathing may be used as well.
See also  Vertical Board And Batten Siding

 

  1. Base Line Establishment
    A chalk line should be used to make a vertical starting base and a starting point should be leveled horizontally. Corner pots will be installed on or just below the chalk line created.

 

  1. Window, Door, and Eave J-Channeling
    Around Windows, doors, and eaves should be covered with j-channels at all times, before the start of the installation of the siding. The top j-channel on the opening should be extended ¼ inches over the side and this top portion should be bent and cut over this extended side to make the water run-off that is required.

 

  1. Corners
    You should start with the corners to make the application easier. The Channel of the corner will be filled with nailing a stripboard that is two inches wide to it. After cutting the locking leg off from the first panel, Snaplock Punch at 12-inch intervals will be applied.

 

  1. Nailing
    Nail at the top at all times! The first nail will be positioned at the upper edge of the slot for nailing next to the top of the panel with a minimum of ¼ inches gap left to the top and the bottom of the panel. With that, the panel will hang on on its own in its right position. Therefore, the rest of the panel will be applied way more easily. After the nailing of the first nail, the remaining will be positioned in the center of the sloths for other nails and the fastened upward movement will be checked.Before starting the installation yourself, you may want to check board and batten vinyl siding pictures and contraction pictures online, so you can have a better idea of what you should be doing
See also  Neighbors Privacy Screen Ideas

 

Vinyl Siding Contractors

 

If you want to find a vinyl siding contractor near you rather than doing it yourself, here are four online services that will help you to find the best board and batten vinyl siding contractors near you:

  1. com
    With reviews you can trust, Modernize will find you vinyl siding contractors near you immediately.
    URL: https://modernize.com/near-me/vinyl-siding
  2. 4feldco
    Explaining the material and the process in detail, 4feldco will help you find some of the best vinyl siding contractors near you.
    URL: https://www.4feldco.com/articles/vinyl-siding-contractors/
  3. EcoView
    For expert installation, EcoView claims that they will make you benefit from the quality vinyl siding contractors.
    URL: https://www.ecoviewwindows.com/blog/p.191205000/benefits-of-quality-vinyl-siding-contractors-for-expert-installation/

 

  1. Homestar
    What Homestar claims is that they provide the best products in the industry along with expert installation. Having five-star reviews, Homestar might be the solution you are looking for.
    URL: https://www.homestarremodeling.com/siding/

 

Vinyl Siding Costs

 

Home siding costs differ in a huge range depending on the size of your house and the material you will be using. While being one of the cheapest materials on the market, vinyl siding also has the biggest range of price with 1-8 dollars per square foot. Therefore for 2000 square feet, the installation cost for the vinyl siding differs in a range of 2000-16000 feet. In general, the estimated total cost for vinyl siding is about 15.000 dollars including the extras and the removal of the old siding.

YORUMLAR

    Leave a Reply

    Your email address will not be published.